Some Types of Hardwood Floors

Using hardwood flooring is an easy way to improve the durability, value, and look of your home. This flooring can be installed in room in your home. When looking at hardwood flooring there are different ways in which to categorize this type of flooring. There are also different installation methods.

Form of the wood

• Acrylic impregnated wood-this is made of a combination of acrylic and solid wood to create a stronger material. This material is strong enough to withstand heavy traffic.
• Engineered wood-this type is made of thinner pieces of wood and layers them on top of each other. The grain of the wood are alternated in layers going in different directions. Being criss-crossed will made it able to withstand more force and weight
• Solid wood

How it is laid out and size of material

• Strips-this is generally measured in long pieces of wood of various size widths from 1.5 inches to 2.25 inches
• Planks-these long pieces of wood are wider than a strip and measure at least three inches wide.
• Parquet floors-this is an intricate pattern that uses pieces of wood, to configure a geometric pattern. It will often take the form of small strips that produce small squares. The squares usually alternate directions but can have other designs such as a zigzag look.

Installation methods

Many hardwood floors are fastened to the sub floor, which is the floor below the hardwood floor, by using staples, nails, or glue. There is also a floating floor, which is not attached to the subfloor. To protect against moister and to absorb sound a foam underlay is put on top of the subfloor. The hardwood floor is not attached to the foam underlay or subfloor. They either snap or glue together in a tongue and groove fashion. The entire floor “floats” above the sub floor. This type is often preferred because they can be put over nearly any type of surface and are easy to install.

How it is treated

The hardwood floor can be stained to give it a light or dark look. They can also be left untreated or natural. Other treatments can include antiquing, crackling, or whitewashing.

Types of finishes

When a hardwood floor is finished, a top coat penetrates deep into the wood or lies on the surface.

• Surface finish—this finish uses varnishes and urethanes. With this finish, you have to consider the odor, ease in application, durability, and drying time.
• Deep finish-this is the one that penetrates deep into the wood and will require an additional coat of wax to give it a shine.
• Sheen-this includes low or high gloss and satin finishes

Laminate Floors – Water Damage Repair

Typically, a laminate floor is water damage resistant. Unfortunately, any amount of water can still destroy the laminate floor. A laminate floor is constructed of many sections that are locked together. The homeowner can do water damage repair without needing to take up the entire floor. Before any repairs can be done you need to dry the area that is wet. It needs to be completely dry. Once dry you can put down new laminated flooring in the sections that were damaged.

Water damage can happen to the laminated floor if a washing machine, refrigerator, or dishwasher leaks. Any standing water damage the floor of course. Once you have located what caused the water leak and fixed it, it is time to dry the flooring completely. To do this you can use a wet/dry vacuum or mopping. Which method is used depends on how much water there is. After you get all the excess water dried up, put a fan on the floor and turn it on to dry the flooring.

Water damage repair starts by taking out the damp sections of the floor. To help prevent ruining the surrounding flooring you can try to use a hammer and chisel to start pulling the damaged parts of the flooring away from the floorboards. If these tools do not work, you may have to use a crowbar or circular saw. Next, use a knife to remove the tongue part of the flooring. Turn on the fan again to dry the floorboards before you put down new laminate flooring. It is important to make sure that the floorboards are dry to help prevent mold growing if the floorboards are left wet.

Most laminated flooring are done in a pattern style so you will have to recreate the pattern on the floor that had water damage before you can put it down. Once you have the pattern complete, use construction glue, and put in the first new piece of the pattern. Before it dries make sure that you clean off any excess glue. Put a heavy object on the flooring until it dries completely. Instead of using glue and dealing with the mess you can use nails. If you choose to use nails, you will need to nail the first flooring section on an existing section so it fits tightly. Continue piecing the pattern together on the flooring until you have the floor repaired. If you cannot find the pattern to match your current laminate flooring you will have to tear all of the flooring up and put down a new one with a different pattern. If you are unable to do this job yourself you can hire a professional to do the water damage repair.

The Ultimate Cheat Sheet for Wood Finishes

Wood finishes are incredible products that work to protect the surface of the boards. They work to enhance the grain pattern and improve the visual appearance of the floor. It is important to understand that there are varying techniques and products that accomplish the best restored wood floor.

This forms the start to the ultimate cheat sheet that will enable you to act confidently when using a wood finish. A good place to start is the methods of application. Finishes have different methods of application and some of these are easier than others. The best-available advice for this is to take your time as rushed use will likely affect the overall result. Rest assured that all variations will provide a protective coating.

It is important to be aware of the fact that wood finish products do not cover up damage to wood floors. What might be examples of these? These may range from sanding scratches, turning mistakes or indentations. In fact, the formulations will likely make these more obvious.

Are you looking for a product that will help the aging process of your wood boards? Firstly be aware that any product will not stop the natural process. There are, however, UV inhibitors available that will slow the process. Over time these will be likely to lose their effectiveness and the wood will turn dark through exposure to light.

Another element that should always be considered is that it is an impossible task to make wood completely waterproof. Only glass, plastic and manmade tile are able to repel liquid in that way. Expert advice is available from best-trained professionals that will ensure your floors are well-protected.

If your wood floor is left untreated then it will act as a sponge, absorbing moisture and creating stains. A way in which you can make your floor look at its best is to appreciate the importance of preparation. A successful application of a wood finish is determined by this. Unsatisfactory preparation will inevitably result in a floor that will not stand up against daily wear.

Floor wax is a well-established floor finish that was regularly used prior to the development of polyurethanes. These are applied by hand and are widely used today. There are two variations including water-based and oil-based formulations. Water-based products are known to be eco-friendly but are likely to be less-durable.

One important element to consider is the fact that products have advanced so much in recent times. This has allowed today’s wood floor restoration specialists to provide a superior service. It is inevitable that with professional help you will identify a wood finish that will offer a durable and long-lasting service.

Get Branded With The New Porcelain Tiles

Porcelain tiles sometimes referred as Porcelain Vitrified Tiles are the vitrified category tiles with an absorption rate of less than 0.5 are the new ceramic tiles used in these days to cover floors and walls. Though it was used in olden day’s too, modern day’s transformation of production processes and quantities made them available to the maximum households. In modern days, the Porcelain tiles production is done both at large scale and small scale thus, making them available to the maximum market space. Furthermore, the hardness of the tiles, assurance by the ISO for the standard in tiles made them much familiar to the normal households.

The major aspect that is attracting more market towards Porcelain tiles is their hardness in comparison of other ceramic tiles. These tiles built and models are making them much user-friendly. The Porcelain tiles are adding more beauty to all the rooms in a home including washing areas and are extending the life of the tiles. Apart from covering the floors of a home they are becoming part of interior decoration of the home sometimes. These tiles can be matched with the furniture, wall papers and interiors to make your space more attractive.

The Porcelain tiles can be used for multiple purposes in the same home. They can be used for flooring, counter tops and many other ways which are known as the innovative ways of using it. They are known for their versatile and elegant look due to which they are attaining a lot of popularity among house owner, builders and interior designers. As an upcoming innovative range of products, these are available across many places. You can contact a tiles retailer near your place or else you can browse through online to find out the right range of varieties available under these.

These are made up of hard and bright ceramic that not only gives it a long life but also brightens its look. As the range of Porcelain tiles is wide, it might be too hectic to find a variety of Porcelain tiles out of many. Hence, getting an idea about the whole range of the tiles and choosing one from that lot is the best option though it is time-consuming. The one best way to find out the best Porcelain tiles for you is to walk up to a nearest tiles showroom and get an idea about the array available in different colors, dimensions and many more.

How to Care for the Most Popular Types of Flooring

Choosing the flooring for a house is a decision that many homeowners find challenging. However, many people don’t take into account factors other than just the appearance. When making this choice, it’s important to keep in mind the maintenance needs of different types. Here’s how to care for five of the most popular flooring options. With these tips, floors of all kinds will look amazing for years to come.

Hardwood

Wood is a popular choice for homes because of its beauty and one-of-a-kind appearance, but it does require special care. Cleaning should involve sweeping at least once a week to prevent dirt from scratching the surface of the wood. Keep surfaces dry-avoid wet mopping and wipe spills immediately. Only certain cleaning products can be used on wood. Avoid oil soaps, products containing acids (including citrus), silicon-based products, waxes, and concentrated cleaners that require adding water. Also, keep windows covered, because the sun can cause wood to fade over time. Rugs can protect high-traffic areas from wear.

Carpet

Carpet is comfortable and warm, but unfortunately, it tends to stain and show wear more quickly than other flooring options. To keep dirt and other debris from becoming embedded into the carpet, homeowners should vacuum daily and use doormats to limit the amount of tracked-in dirt. Spills should be cleaned as quickly as possible to keep them from setting into the carpet. Also, regular shampooing can help maintain the carpet’s original appearance.

Vinyl

Vinyl is popular because it is durable and inexpensive. It’s also versatile because it can be manufactured in an endless variety of styles. Vinyl is very easy to clean. Sweep regularly and mop as needed with a gentle cleaner that is specially designed for vinyl. However, only warm water should be used for mopping, as hot water can damage the finish and may even cause the vinyl to warp.

Marble

Marble is a beautiful, elegant, and classic choice for any home. However, it is a porous natural stone, which means it can absorb spills and become stained. As with other types of flooring, spills should be wiped up immediately. If the spill is an acidic substance, the area should be cleaned with a damp soapy cloth. Do not use any abrasive materials for cleaning, including steel wool or cleaners with grit for scrubbing.

Ceramic Tile

Ceramic and porcelain tiles are popular choices for flooring in kitchens and bathrooms. With proper care, this beautiful, natural material will last for years. Anyone who chooses ceramic should be prepared to sweep daily, as dirt and grit can scratch and dull the surface of ceramic tile. Also, only a rag or chamois mop with hot water and a gentle cleaner should be used for deep cleaning.