Importance Of Installing An Adequate Ventilation System

A clean indoor environment is of great importance due to the many hours that you spend within your home. The indoor air that you breathe in should be fresh and clean to ensure that you do not get any respiratory complications.

The only way your home can have a continuous supply of fresh air is through effective home ventilation. As long as your home has adequate ventilation, condensation which leads to a damp home will not take place. The structure of your home will not suffer decay and will remain intact for a long time.

Importance Of Ventilating Your Home

If your home is damp and has a musty smell, ventilation can help to keep your home dry and ensure that the indoor air is fresh and clean. Ventilation gets rid of the stale indoor air and replaces it with fresh air from the outside. There are different methods of ventilating your home such as the natural method. Natural ventilation is the free flow of air into the home from doors, windows and openings around the building. However, if you are living in a home that is insulated, you will need to have a mechanical ventilation system that will air your home.

The Use Of Mechanical Ventilation

You can opt to use mechanical ventilation in order to effectively get rid of stale air from your home. You can decide to install fans in the specific location where moisture build up and pollution is originating from in the home. For instance, you can install fans in the bathroom, kitchen or on the sub floor to get rid of moist air and replace it with drier air from outside. You can also decide to use whole house ventilation where the entire house is ventilated by a set of fans which bring in the fresh air and duct systems which get rid of the stale air.

Heat Recovery Ventilator

A heat recovery ventilator (HRV) is an efficient home ventilation system which captures the heat from the outgoing stale air to heat up the incoming fresh cold air. A HRV is made up of a fan which brings in the fresh air and another fan which gets rid of the stale air. The system has a core where the exchange of heat from the stale air to the clean air takes place.

The core where the transfer of heat takes place has a thin route through which the stale and fresh air passes. However, the stale and fresh air does not mix at any point during the heat transfer. An HRV is able to retain about eighty-five percent of the heat from the outgoing stale air which makes it an efficient ventilation method. During the warm summer days, the HRV can take the heat from the incoming air and transfer it to the stale outgoing air thus allowing you to enjoy the cool clean air.

Contacting A Ventilation Expert

In order to get the best home ventilation system, it is a good idea to contact a ventilation expert who will assess your home from the ground to the roof. The expert will then recommend a ventilation system that will effectively air your home. You should ensure that the system which is installed is quiet enough and has a warranty.

The Best Wood to Use for Stairs at Home

A new timber staircase can transform your hallway and give the whole property a boost. Even just replacing the banister rail will make an enormous difference to the look and feel of your home, and of course is much quicker and cheaper than installing an entire set of stairs.

Choosing which materials to use, however, is not always straightforward. We take a look at some of the different types of wood available for stair construction.

Scandinavian Pine

Also known as European redwood, this pale yellow softwood is produced in renewable plantations, making it a sound environmental choice. Attractive and affordable, with a knotty appearance adding character, pine is ideal for anyone on a budget. And of course if you’re intending to carpet or paint the staircase, you may feel there’s little point in splashing out on expensive materials that will only be covered up.

Southern Yellow Pine

This is the largest, hardest and strongest type of pine – tougher, in fact, than many hardwoods. Southern yellow pine is a durable, sustainable and cost-effective timber, with an appealing golden colour and distinctive large grain pattern. Grown abundantly in southern parts of the USA, it is ideal for staircases, floors and furniture.

Hemlock

An attractive and versatile softwood with a soft sheen, hemlock has a straight, light-coloured grain that can be varnished to a rich golden colour. Moreover, it is practically knot-free and easy to work with. This makes it a great substitute for more expensive timbers such as oak or ash, so is worth considering if your budget is limited. Hemlock can also be stained, varnished or painted.

Oak

There are various types of oak, with white oak considered the best option for stairs. Prized for its strength and durability, it has a beautiful knot-free grain that never seems to go out of fashion. In fact, so dense is white oak that it is almost water-tight, which is why it is used to make, among other things, boats, wine barrels and outdoor furniture.

Another advantage of white oak is that the grain is very stable, with few variations in pattern and shade. This makes it easier to match up new stairs with existing oak fittings such as skirting boards, floors and doors. It also takes wood treatments very easily.

There are two main sources of white oak: the USA and Europe. American white oak is more widely available, and therefore less expensive, with a straight grain and pale biscuit colour. European oak is a slightly darker, golden honey shade with a distinctive wavy grain pattern.

Ash

This premium hardwood is even tougher than oak, with a largely straight grain and attractive colours ranging from cream to pale brown. The most abundant type is American white ash. Heavy, hard and highly shock-resistant, it makes excellent stair treads. Because it has an open grain, ash is very flexible, so can be shaped to produce a variety of curved stair parts.

Sapele

This reddish-brown hardwood looks similar to mahogany, and indeed belongs to the same family. With a distinctive tight, interlocking grain, it provides a strong and cost-effective alternative for use in furniture, flooring and cabinets as well as stairs. Sapele is harder and more stable than mahogany, with a dense structure that is highly resistant to rot and almost completely water-tight. This makes it ideal for outdoor as well as indoor use.

Idigbo

Native to West Africa, idigbo is a pale yellow-brown hardwood with a variable grain that can be straight, slightly irregular or interlocking. It is often chosen as an economical alternative to oak, and can be stained, varnished or painted. Although idigbo is not quite as durable as oak, it offers a good level of strength with little shrinkage, and can be shaped to produce attractive curved stair parts.

Walnut

There are several types of walnut tree, but the one most often used in staircase construction is American black walnut. Strong and stable, this premium hardwood has a mostly straight grain and ranges in colour from dark chocolate to a pale brown. Black walnut is expensive but versatile and extremely hard-wearing. It can be carved into elaborate shapes, making it ideal for intricate stair components such as balusters, volutes and newel caps.

Tips For Removing Snow And Ice for Home Decoration

Getting rid of snow and ice on your lawn and surroundings is a very essential winter safety activity. When shovelling snow, people may suffer from injuries. These kinds of include blisters and cardiovascular attacks. Know though that with proper safety types of procedures, these injuries can be prevented.

Shovelling Your Front yard

Slips and falls can be prevented when you keep your driveway and walkway clear of snow and ice. It is quite vital that you keep some safety tips in head each time you spade.

Know if you must not shovel – Presently there are certain people who are vulnerable to injuries if they shovel snow. In the event that you have a background of cardiac problems, avoid accomplishing this activity.

Dress properly – It can be tempting to just go out and remove the snow and ice on your walkway regardless of what you are wearing. If perhaps you dress the right clothing with this activity, accidental injuries can be prevented. This is highly advised that you dress in levels – wear a brain covering, a scarf, warm socks, and gloves. In addition, wear waterproof booth with slip-resistant soles.

Use the right shovel – Generate sure to use the shovel that fits your body size and your level of strength. Select the one that has a cope with that is the right length for your level. If you use the one that has short handle, you could be leaning forward more. This kind of will likely put you the risk of a back injury. Most significantly, choose the one that is very comfortable to use.

Be mindful with deep snow – You must remove the snow when the ground is lightly covered. This will reduce the accumulation of packed, heavy snow. Alternatively than lifting the snow, just push it. Although if lifting it is necessary, do not clog the shovel. And when the snow is deep already, remove it in layers.

Always stay hydrated – Once you are out to shovel, drink a container of water. There after, drink regularly so you may become dehydrated. Avoid overexerting as well. This means that you have to take breaks often. You may go indoors to loosen up. And if you feel any pressure or pain in your chest, immediately call your medical professional.

Removing Glaciers

Aside from making time for your footing, here is also safety tips when doing this activity.

Purchase the right chemical products – An efficient way of melting the ice is putting a layer of rock salt on frigid areas. Be reminded though that rock salt can damage concrete and material surfaces. Also this is harmful to plants. Before to using any ice cubes melting products, you must carefully look at the labels.

Take away icicles – You need to reduce any hanging icicles from gutters and roofing edges. This will prevent injuries to children if they fall.

The Pros and Cons of Space Saver Stairs

Space saver stairs are becoming a lot more popular. Also known as alternating tread staircases, loft stairs or exercise stairs, they provides a convenient way of attaining an attic or basements where a standard stairs wouldn’t fit.

The steps are so compact because they are designed with alternate handed steps, effectively halving the amount of treads required – hence the overall impact of the staircase is much smaller than normal stairs. They can, however, take somewhat of getting used to. So, are space saver stairs well worth having? Let’s look at some of their best and worst aspects.

Positive aspects of space saver stairways

Convenience – Anyone who has ever wrestled with folding loft steps will appreciate being able to simply walk up a set of long lasting stairways when they need something from the attic.

Security – As a set structure, space saver steps are much sturdier than any ladder. In spite of this, the design needs to be right. As each step takes more strain than the average staircase (due to the steep pitch), the treads should preferably be at least 32mm thick and made from a strong timber such as oak or lung burning ash. Pine and similar softwoods are liable to fracture so must not be used. Slip-resistant surfaces for the treads are essential. You will probably desire a robust handrail, preferably on both sides. Provided these conditions are met, it is not necessary to worry about basic safety.

Style – These steps are available in a variety of designs and materials, so that you can choose one to suit your home’s persona and d? cor. The cut-away steps are believed by many to be a nice-looking design feature – and you will even paint or discolor them different colours for added effect.

Cost – And there is fewer treads in space savings staircases they generally cost less to produce than standard stairs, making them an economical strategy to home owners on a budget.

Drawbacks of space savings stairs

Restricted use – These types of stairways are not intended for use as a main staircase, but are only well suited for access to a single room such as an attic or basement.

Unusual design – This can take a little while to get to grips with the different tread arrangement, as you only place one feet on each step. A few people find it much easier to get started on their kept foot rather than their right, and vice versa. Many stair manufacturers are able to accommodate specific preference, and arrange the steps accordingly.

Pitch – Obviously, these staircases have to be steeper than standard stairs otherwise they will not have a reduced footprint. This does make them a little harder to climb than normal stairs, which is why strong handrails are especially important with this kind of design.

What about building regulations?

Legal requirements are frequently interpreted differently relating to in your geographical area, so always check with any local building control officer before placing your order a staircase. The primary factors to remember are: The steps should only lead to 1 room; they simply cannot be used as the key staircase; they must be straight; you must fit a handrail where the drop is greater than 60cm; the most pitch (steepness) permitted is 42 levels; and you need to allow a minimum brain room of 1. 9m.

How to Choose the Perfect Countertops

Getting cabinets and countertops in a kitchen can boost the experience in one’s kitchen as well as offer a different environment for friends. Cabinets and countertops can be installed in the kitchen, bathroom, or a finished basement.

When looking to get new cabinets and countertops it is important to find a few key points first. The most important factor in buying cabinets and countertops is to first realize what type of countertop you would like to make investments in. Countertops come in a variety of varieties and it is to the purchaser to determine what countertops would fit them best. Corian for instance is heat immune and is nonporous and absorb bacteria when organizing food. Another type of countertop is Granite which is heavier will not well over time. Layered is yet another form of countertops which is typically cheaper but offers a variety of different colors and options for purchasers. Glass and concrete floor countertops have also gained popularity for consumers. Finally when shopping for units, the sort of wood and design is merely as critical as picking the right counter top as well.

When shopping for cabinets and counter tops it is important to look around for the right deal. Gonna different companies, asking around, and finding the right bid may potentially make or break finding the right package. There are numerous cabinet and counter top companies out there, finding the right is the hard part.

Countertops and cabinets do come in several shapes, sizes, and thicknesses. When purchasing a kitchen counter it is important to make note of how thick you’d like your countertop to be as well as how you need it to fit in your kitchen. Good countertop companies will continue to work with you to ensure that the final product fits well with your home and nothing appears out of place.

As well ask your provider about the edges of your countertops. Different bevel ends give you a variety of alternatives. However, some edges are rounded off which is great for homes with small children, and some can be sharper given your living environment a more sleek look.

The customer must keep an eye out for what he/ she would want to install into their homes. Ensure you really know what you’re looking for and ask neighbors about their experience at different case and countertop companies.