There are many reasons why you may need to sand a floor. This project is often required when stripping a surface before a coat of lacquer is applied. Sanding is also common to remove paint, stains and other surface imperfections. Either way, there are a number of steps to take as well as a handful of useful tools to keep in mind. Let us look at this process in more detail so that you are prepared in advance.

Initial Preparation

It is important that the floor is properly prepared before the actual act of sanding begins. First, make sure that there are no mails or other bits of metal sticking out of the floorboards. These will cause the sandpaper to tear and they may even result in an injury if you are sanding by hand. Once such items have been removed and discarded, remove any other debris such as dust that may be present.

Sanding Tips and Tricks

It is always best to work around the periphery of the floor when beginning. This will enable you to sand along any panels and skirting that may be present. In the event that the existing skirting needs to be preserved, it is a good idea to cover it with tape in order to protect it from scuffing.

The grit of the sandpaper should also be taken into account. Heavier grits (such as 60 and 80) will remove more of the surface when compared to grit levels of 140 or 160. Some individuals will employ a heavier grit to act as a “rough finish” before moving on to lighter grits when polishing the surface.

In terms of mechanical action, be sure that each area is sanded evenly. Apply the same amount of pressure in order to avoid any noticeable scuff marks and removing too much of the surface layer. You will otherwise notice imperfections when stain or lacquer is applied.

The Tools of the Trade

There are many different sanding tools which can be employed. These are particularly useful when dealing with larger areas, as their mechanical action is able to tackle a massive amount of work. These tools can be separated into several different categories such as:

  • Belt sanders
  • Palm sanders
  • Orbital (rotary) sanders
  • Eccentric sanders

Please note that each of these units is designed to address specific tasks, so it is wise to read their specifications carefully in order to determine which one represents the most appropriate choice. On a final note, always choose electric sanders that are equipped with hoses or bags to catch any dust that may be generated. It is prudent to choose from the selection of quality brand names found at Data Power Tools. You can remain confident that their sense of reliability and durability is never called into question. As a result, even the most challenging of sanding tasks will be able to be carried out within a timely fashion.

Leave a Reply

Your email address will not be published. Required fields are marked *